VW Touareg repair


+ 1. Operation and car maintenance
- 2. Engine
   + Preliminary checks on the car
   + Mechanical part (petrol engines 3,2L)
   + Mechanical part (petrol engines 4,2L)
   + Mechanical part (diesel engines 5,0L)
   + Removal and stretcher installation
   + pressurization System (diesel engines)
   + cooling System (petrol engines)
   + cooling System (diesel engines)
   - Greasing system (petrol engines)
      Removal and installation of elements of system of greasing
      Removal and installation of an oil nozzle
      Removal and installation of the return valve of a drain of oil
      Dismantling and assembly of the oil pump
      Removal and installation of the oil pallet
      Check of the sensor of pressure of oil
      Check of pressure of oil
   + greasing System (diesel engines)
   + injection System (petrol engines)
   + injection System (diesel engines)
   + System of production of the fulfilled gases
   + System топливоподачи (beninovy engines)
   + Tables
+ 3. Transmission
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes



Volkswagen Touareg / Touareg repair>> Engine>> Greasing system (petrol engines)>> Check of the sensor of pressure of oil
Check conditions
The temperature of engine oil should be not less than 80 °C (the fan of system of cooling should work at least once)
In cars with automatic transmission transfer the selector to the situation "P" or "N".

Works order
Remove the sensor of pressure of F1 oil and screw in it in a manometer.

Fig. 2.259 . The adaptation for check of pressure of oil


Twist V.A.G 1342 manometer with the V.A.G 1342/14 adapter instead of the sensor of pressure of oil in the holder of the oil filter (fig. 2.259) .

NOTE
Observe assembly position of the V.A.G 1342/14 adapter: the konusny connecting branch pipe of the adapter incorporates to a pressure head hose of a manometer of V.A.G 1342.

Put a brown wire of a manometer for measurement of pressure of oil V. A. G 1342 to weight (–).
Connect a tester of tension of V.A.G 1527B by means of auxiliary wires from a set of supportive measuring applications of V.A.G 1594 C to a positive conclusion of joint stock bank (+) and to the sensor of pressure of F1 oil. The light-emitting diode of a tester should not light up.
If the light-emitting diode lights up replace the sensor of pressure of F1 oil.
If the light-emitting diode does not light up get the engine and leave to idle.
At superfluous pressure 1,2–1,6 bar the light-emitting diode should light up, otherwise replace the sensor of pressure of F1 oil.


<