NOTE The CD receiver has protective coding. If after inclusion the CD receiver does not work and at the display SAFE inscription, it means that the CD receiver is blocked.

Fig. 1.73 . CD receiver governing bodies: 1turn-push handle; 2keys of stations; 3automatic storing of six most well heard radio stations; 4digital sound processor (choice of options of sounding); 5inclusion/switching off of options of road radio; 6transition to the last road message (TIM) brought in memory or to the last transmitter of road radio; 7mine for compact discs; 8transition to the last road message (TIM) brought in memory or the closest transmitter of road messages; 9transition to the previous radio station or a compact disc track; 10-indications on the display; 11-transition to the following radio station or the following track of a compact disc; 12-compact disc emission; 13-turn-push handle; 14-listening and storing of road messages; 15-balance / ; 16-timbre adjustment (low, average and high frequencies); 17-switching on a srednevolnovy range (MW) and storing of stations; 18-switching on a short-wave range (MW) and storing of stations; 19-reproduction of compact discs; 20-listening of tracks of a compact disc

Using an audiosystem at movement

Modern traffic conditions demand constant attention of drivers.

The modern automobile radio equipment along with entertaining function offers drivers various road information on traffic conditions, a road condition, jams etc.

To use road information, it is necessary to familiarize with numerous possibilities of modern automobile radio equipment close

Listening of broadcasts and compact discs inclusion/switching off

Easy contact of the turn-push handle 1 it is possible to include or switch off a CD receiver.

Thus the radio station on which the tuner before CD receiver switching off was adjusted starts to work with the same loudness.

If at the included CD receiver take out a key from the ignition lock, the CD receiver is automatically switched off.

At return insertion of a key in the ignition lock, a CD receiver automatically joins.

At the ignition key taken out from the lock it is possible to include a CD receiver in easy pressing of the turn-push handle 1. It is automatically switched off approximately in an hour for prevention of the category of the accumulator.

In repeated pressing of the handle it is possible to include a CD receiver again.

Regulation of loudness (Volume)

Fig. 1.74 . Turn-push handle

At turn of a regulator of loudness (fig. 1.74) on the display appears an inscription of Volume and a strip of a choice of loudness. In this strip loudness level graphically is represented.

The strip disappears approximately in five seconds after change of level of loudness.

NOTE If it is established a minimum level of loudness, the strip of a choice of loudness with addition of MIN remains in the changed look on the display. You have possibility to establish a certain level of loudness at inclusion a CD receiver regardless of the provision of a regulator of loudness.

Storing of stations (storing manually)

Choose a desirable range.

Be adjusted on desirable station.

Press and hold pressed that key (a key of stations 1-6) under which you go to bring this radio station until the broadcast will cease and the signal will not sound.

Fig. 1.75 . Keys of stations

The radio station is brought in memory.

After station storing on the display there will be number of a key of station (if the radio station, for example, is brought in memory on a key 3 there will be figure 3).

It is possible to bring in memory of at most 24 radio stations on 6 stations on each of four ranges.

FM1/FM2 = on 6 stations, AM1/AM2 = on 6 stations.

NOTE Watch that when entering into memory of stations on the display there was a name of this station, instead of the running text, differently this line will be brought in memory instead of the radio station name.

Change of compact discs the CD mode

Fast easy contact of a key with 1 on 6 it is possible to load at the connected CD changer into shop a certain compact disc.

The loaded compact disc will be shown on the display from CD1 to CD6.

If in a CD changer there is no shop, on the display there will be a message: NO MAGAZINE.

Automatic storing

By pressing of the AS key automatic storing of six radio stations with the strongest of signals on FM2 and AM2 levels is carried out.

Fig. 1.76 . AS key

Choose a range as the AM or FM keys (fig. 1.76) .

Press and hold pressed about two seconds the AS key. On the display there will be AUTOSTORE inscription. Then six radio stations with the strongest signal on levels of memory of FM2 and AM2 will be automatically brought in memory.

Road radio TP (Traffic Program)

Fig. 1.77 . Traffic Program

By means of keys 5 (TP Traffic Program) can be operated road radio.

In easy pressing of the TP key it is possible to include or switch off the TP function. The TA-"Bereit-schaft" function (by "Traffic Announcement" road messages) is at the same time activated

At the active TP function on the display there is TP message (for example, TP: ntenne).

If no station of road radio is found, on the display there is TP: No TP.

If the station on which the tuner is adjusted, at all does not transfer road messages, the tuner is automatically adjusted on that station of road radio on which (Last Station Memory) was adjusted before.

If this station is not audible any more, the tuner automatically starts to look for the accepted station of road radio next on frequency. On the display there is TP: TP-Seek.

At control for any TP station on the display there is TP: TP station name (for example: TP: ntenne).

Fig. 1.78 . Traffic Program road radio

Names and frequencies of stations which transfer road messages, are provided on indexes lengthways and partially on other roads.

TA readiness mode

At an active mode of TA readiness it is possible to listen to road messages. If the established level of loudness absolutely low or is chosen other operating mode (radio, listening of compact discs), that, despite it, road messages are transferred with earlier programmed level of loudness. If the transmitter which transferred road messages, already out of a reception zone, approximately through 30 snezametno, at a background begins search of new station of road radio.

During transfer road messages the audiosystem is automatically switched to monosounding, and the digital DSP processor transfers an audiosystem to a mode of sounding of "TALK".

NOTE As in a CD receiver two tuners function, settings for transmitters of road messages occur imperceptibly for the listener and irrespective of control for actively accepted radio station. Only during transfer of road messages that TP transmitter on which the second tuner is adjusted becomes audible. If the car leaves an area of coverage of that TP transmitter on which the tuner is adjusted, search of the new TP transmitter automatically begins.

Road radio TP transmitter change

You can choose as keys of road radio 6 and 8 at will of any the TP transmitter.

In easy pressing of a key 5 it is possible to include or switch off function of transfer of road messages of TP. TA readiness function is at the same time activated.

It is possible to be adjusted by a key 8 on other, next TP transmitter.

It is possible to be adjusted by a key 6 on the former TP transmitter.

The list of accepted TP transmitters at a background automatically is updated.

Road radio automatic control

By means of the Auto TP function it is possible to activate a mode of automatic control for the TP transmitter with the strongest signal.

In easy pressing of a key 5 include or switch off function of transfer of road messages of TP. TA readiness function is at the same time activated.

Press and hold pressed a key 6 or 8 until on the display there will be no TP indication: auto TP.

Release that key from 6 and 8 which was pressed.

Approximately in five seconds the signal and TP indication will sound: auto TP will start to blink. The tuner looks for the TP transmitter with the strongest signal.

Road radio interruption of the road message

During transfer of the road message which you wish to interrupt, concern the TP key

For long shutdown of transfer of road messages hold pressed the TP key until on the display TP message will not seem: OFF.

Can to happen so that it is necessary to interrupt the transferred road message, for example:

the road message does not belong to that site of a way on which the car follows.

the road message too long, and all the most important was already told.

As soon as transfer of the road message will be interrupted, the former operating mode or transfer of usual radio programs, or listening of compact discs will renew. The interrupted road message will be brought in the TIM store, and in need of it it will be possible to hear later. However the following new road message again will interrupt hearing of radio programs or compact discs.

Listening of the road messages brought in memory in any order

Press a key 14.

By means of keys 6 and 8 pass according to road messages forward (a key 8) or back (key 6), or by the beginning of any message.

Listening in a chronological order

Press a key 14.

Transfer of the written-down road messages begins with most the last and is farther to the first.

On the display it can be shown, for example: TP Memo 2/3.

That means: TP-Memo: transfer of the road messages brought in memory.

2/3: The second message from three brought in memory.

If there were no road messages, on the display appears: No TP-Message.

Listening of compact discs and road radio

In order that did not interrupt listening of compact discs hold pressed a key 5 until on the display TP message will not seem: OFF.

If before pressing of a key 19 road radio was included, road messages interrupt listening of compact discs.

If the car leaves an area of coverage of that TP transmitter on which the tuner is adjusted, search of the new TP transmitter automatically begins.

It is possible to interrupt with pressing of a key 5 transfer of the road message and to continue compact disc hearing.

The interrupted road message will be brought in the store 19, and in need of it it will be possible to hear later.

However the following new road message again will interrupt compact disc reproduction.

Keys of search of radio

Fig. 1.79 . Search keys

Concern a key of search 11 or 9 radio station search in the chosen direction will begin, then the first station with a strong signal will be chosen, and it will be audible.

List of radio stations

In pressing of a key of search 11 or 9 it is possible to move up and down according to the list of radio stations.

Your tuner constantly traces all well accepted radio stations. At turning on of the tuner automatically all accepted radio stations are entered in the list in sequence of their PI codes (Programm-Identifikation).

On a PI code the tuner identifies radio stations, for example: NDR 2.

NOTE Search is possible only in a srednevolnovy range (the AM key should be pressed before). The choice according to the list is possible only in an ultrashort-wave range (the key before should be pressed) FM. Stations without RDS settle down at the very end of the list of stations.

Choice of tracks

11 or 9 it is possible to choose as a contact of a key of search the necessary track on a compact disc, "looking through" tracks up or down. The chosen track is shown on the display (for example: TRACK 12).

The accelerated search forward and back

During reproduction press and hold pressed a key of search 11 or 9 until will reach the right place.

Then release a key 11 or 9.

Compact disc extraction

Fig. 1.80 . Key of extraction of a compact disc

Press a key 12 - the compact disc will be taken from mine (fig. 1.80) .

Balance adjustment /

Fig. 1.81 . Balance adjustment /

Balance (BALANCE), feeder (FADER).

Press a key 15 to choose, what to regulate BALANCE (on the front) or FADER (on the back).

Rotation of the handle 13 establish desirable distribution.

For confirmation of adjustment press the handle.

By means of the BALANCE function establish loudness of sounding of loudspeakers at the left and on the right.

By means of the FADER function establish loudness of sounding of loudspeakers in front and behind.

Timbre adjustment

Adjustment of low (BASS), average (MIDDLE) and high (TREBLE) of frequencies.

Fig. 1.82 . Timbre adjustment

Press a key 16 that then it was possible to regulate low BASS, average MIDDLE or high TREBLE of frequency (fig. 1.82) .

Rotation of the handle 13 adjust certain frequencies.

In pressing of the handle 13 pass to adjustment of other frequencies.

On the display there are adjustable frequencies of "BASS", MIDDLE or TREBLE and a regulation strip. This strip graphically represents change of adjustment of low, average and high frequencies.

The strip disappears approximately in five seconds after the completion of adjustment.

Keys of a choice of an audiosource

Fig. 1.83 . Keys of a choice of an audiosource

AM key (srednevolnovy range of radio).

In pressing of a key 17 it is possible to get to the first a srednevolnovy range.

By repeated pressing of the AM key it is possible to get to the second a srednevolnovy range. On the display there is AM1 for the first or AM2 for the second .

AM key ( new range of radio).

In pressing of a key 18 it is possible to get to the first an ultrashort-wave range.

By repeated pressing of the FM key it is possible to get to the second an ultrashort-wave range. On the display there is FM1 for the first or FM2 for the second .

CD key (reproduction of compact discs).

In one pressing of a key 19 compact disc reproduction on the built-in CD receiver gets out.

At the connected CD changer it is possible to choose as repeated pressing of the CD key between a CD receiver and a CD changer.

Indications when listening broadcasts

Fig. 1.84 . Indications when listening broadcasts

And road radio (TP) and the name of the transmitter of road radio.

In the name of listened radio station.

With (FM, AM).

D-r under which this radio station is brought in memory.

At included RDS instead of frequency the station name is shown.

Protective coding

Protective coding does impossible unauthorized using a CD receiver after its removal from the car.

Convenient protective coding for the reasons of technical character possibly not on all models of cars.

Until recently you were compelled each time after removal of a CD receiver or accumulator shutdown manually to remove electronic blocking.

With introduction of new convenient protective coding situation changed: now after the very first input of number of a code in a CD receiver it is in addition brought in memory of the car!

If power supply was disconnected, the CD receiver automatically compares "the" number of a code to what was entered into memory of the car. If numbers of a code coincide, the CD receiver in some seconds is efficient.

There is no more need to remove electronic blocking manually.

If numbers of a code do not coincide, for example, when the CD receiver is established on other car, electronic blocking should be removed manually.

Radio card

Code number together with serial number of a CD receiver is brought in the radio card (the card for this CD receiver).

The radio card should be stored in a reliable place and at all in the car.

NOTE If after CD receiver inclusion on the display there was SAFE together with small figure 2 at the left, is means that the device is blocked. Now it is necessary to leave a CD receiver at one o'clock included, and then again to make attempt to remove blocking.

Wrong number of a code

If at removal of electronic blocking the wrong number of a code was wrongly entered, on the display makes a fresh start to blink SAFE inscription, and then it is shone constantly.

Now it is possible to repeat all process of removal of blocking one more time. The number of attempts is shown on the display.

If the wrong code was again entered, within the next hour it is necessary to refuse attempt to enter a code. To learn that the device is blocked, it is possible on small figure 2 at the left in the bottom of the display. On the expiration of hour throughout which the CD receiver should remain included, the indication of number of attempts disappears, and it is possible to start again blocking removal in the same sequence.

This cycle two attempts, then hour of expectation can be repeated and repeated.