Fig. 8.49 . Adjustment of a sealant of the panel of the hatch

Check by means of a cardboard strip in thickness about 0,3 mm (for example the card), whether the density between a sealant of the panel 2 and a body on all perimeter of the hatch (fig. 8.49) is uniform .

The cardboard card should be stretched between a sealant of the panel and a body hardly.

Remove the glass panel of the elevating and movable hatch

If the density of a prileganiye is too small, it is possible to move apart a panel 2 sealant by means of a wedge 3409 1.

Fig. 8.50 . Sealant pressing

At too dense prileganiye of a sealant to a body press a sealant 1 by means of a clamping roller 3356 more densely to the panel (fig. 8.50) .

For sealant adjustment the glass panel 3 should be removed.

Fairing removal

Fig. 8.51 . Fairing removal

Open the elevating and movable hatch completely, insert a hook 3370 between edge of the panel and fastening of a fairing and, having pulled a hook, release fairing fastening from a lateral clamp (at the left / on the right) (fig. 8.51) .

Hook a screw-driver fairing fastening from a directing rail (at the left / on the right).

Take out a fairing.