Removal

Fig. 7.69 . Extraction of panels

Hook and take panels 1 and 2 by means of T10039/1 wedge from clamps (fig. 7.69) .

NOTE To remove a steering wheel it is not required. However for descriptive reasons in the following drawings the wheel is not represented. Steering column with electric or mechanical adjustment put in the lowermost situation and pull on itself against the stop. Switch off ignition and all electric consumers, take the ignition key.

Fig. 7.70 . Extraction of the facing panel

Unscrew screws of 1 top facing panel of a steering column 2 and remove the panel (fig. 7.70) .

Remove a peak of a combination of devices.

Fig. 7.71 . Screws of fastening of the holder of a peak of a combination of devices

Unscrew screws of 1 holder of a peak of a combination of devices 2 (fig. 7.71) .

Fig. 7.72 . Top bolts

Unscrew bolts 1 (fig. 7.72) .

Remove the holder of a peak of a combination of devices, having pulled it up.

Fig. 7.73 . Shtekernye of connection

Take a combination of devices and disconnect shtekerny connections 1 on a reverse side of a combination of devices (fig. 7.73) .

Installation

Installation is carried out in return sequence, thus it is necessary to consider the following.

Establish a combination of devices in a nest on the forward panel and connect sockets.

Establish the holder of a peak of a combination of devices.

After installation check work of functions of a combination of devices.

Description of the back party of a combination of devices

Fig. 7.74 . Back party of a combination of devices: 1–socket, 32-contact; 2–socket, 32-contact

NOTE It is forbidden to assort a combination of devices. If necessary the combination of devices is replaced assembled.