VW Touareg repair


+ 1. Operation and car maintenance
+ 2. Engine
+ 3. Transmission
- 4. Running gear
   + Wheels and tires
   + Forward suspension bracket
   - Back suspension bracket
      Removal and installation of the back sensor of level of a body of G76/G77
      Suspension bracket of back wheels
      Removal and installation of an amortization rack
      Wheel support
      Removal of a nave of a wheel with the bearing
   + Tables
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes

!

Volkswagen Touareg / Touareg repair>> Running gear>> Back suspension bracket>> Removal and installation of the back sensor of level of a body of G76/G77

Fig. 4.85 . Scheme of installation of the back sensor of level of a body: 1–stretcher; 2–the screw with an internal shestigrannik, 5 N · m; 3–cross-section lever, the top forward; 4–nut, самоконтрящаяся, 8 N · m; 5–back sensor of level of a body


Removal
Lift the car.
Disconnect electric connection on the back sensor of level of a body.
Remove screws 2 and a nut 4 and take the back sensor of level of a body.

Installation
The back sensor of level of a body attach bolts 2 to a stretcher.
Fasten a finger of the spherical hinge by means of a new nut 4 to the top forward cross-section lever.
Thus the hinge between the lever of the back sensor of level of a body and connecting draft should be directed down.
Tighten all bolts the corresponding moment.
Lower the car on wheels.
Execute base setup of the back sensor of level of a body by means of VAS 5051 tester.


<