VW Touareg repair- 1. Operation and car maintenance + General information + Keys and locks of doors, electric steklopodjemnikiya - Governing bodies and control devices Governing bodies on a multipurpose steering wheel Control devices The black-and-white display in an instrument guard The color display in an instrument guard Precautionary and information messages on the display Alarm and control lamps Electrohatch Management of external lighting Alarm system Podruleva switch of light of headlights and turn indexes Screen wipers Mirrors Hatch of a mouth of a fuel tank Opening of a cowl of a motor compartment Simplification of landing in the car Forward central armrest with a box for small subjects Warmed forward seats The central armrest with two boxes for small subjects Back central armrest Back central console Ashtrays and lighter Fire extinguisher Luggage compartment Dividing grid Luggage carrier on a roof CD receiver control panel + Management of a microclimate + Seats + safety Systems + Maintenance and driving + Tables + 2. Engine + 3. Transmission + 4. Running gear + 5. Steering mechanism + 6. Brake system + 7. Onboard electric equipment + 8. Body + electric equipment Schemes лечение спины |
Volkswagen Touareg / Touareg repair>> Operation and car maintenance>> Governing bodies and control devices>> Electrohatch
Opening and electrohatch closing
At the included ignition management of the electrohatch is carried out by means of the rotary switch.
Electrohatch closing
Turn the switch in situation A
(fig. 1.40)
.
Moving of the panel of the hatch
Turn the switch in V.Panel's position of the hatch will open before a certain, comfortable situation at which aerodynamic noise are minimum.
Even more to open the hatch, turn the switch in a position C and keep it in this position until the panel will not occupy desirable situation.
Lifting of the panel of the hatch
Turn the switch in situation D.
Always close completely the hatch when you park the car or leave it without supervision.
After switching off of ignition it is possible to open or close within ten minutes the electrohatch if any of forward doors during this time was not open.
Sun-protection panel
The sun-protection panel opens together with the hatch panel. It can be shifted and at the closed hatch.
Protection against an electrohatch overload
The electric drive of the panel of the hatch is supplied with protection against an overload that prevents pressing by the panel something to a roof. Protection against an overload, however, completely does not exclude probability of pressing of fingers. If something disturbs panel closing, it stops and comes back back.
Such panel which has come back to open situation can be closed, if the rotary switch is in a position A
(fig. 1.40)
to hold inclined кзади until the hatch completely will not be closed. Thus it is necessary to consider that the panel is closed now without protection against an overload.
If the panel in any way does not manage to be closed, можнозакрыть it вручну.
Programmed remote control
By means of memory keys on a ceiling it is possible to program, for example, remote control on opening of gate of garage.
By means of keys 1, 2 and 3
(fig. 1.41)
it is possible to program remote control on performance of separate functions, for example, on management of entrance gate, garage gate, illumination of a site.
Programming
Press keys 1 and 3 and hold them pressed until the light-emitting diode over a key 2 will start blinking, then release keys.
Establish a radio key, for example, from garage gate, at distance about 5 cm before keys.
Press the necessary key of a radio key at the same time with a key 1, 2 or 3.
Hold pressed both keys until the light-emitting diode will not start to blink at first slowly, and then quickly.
Reprogramming of one separate key of memory
Press a key 1, 2 or 3.
Establish a radio key, for example, from garage gate, at distance about 5 cm before keys.
Press the necessary key of your radio key at the same time with a key 1, 2 or 3.
Hold pressed both keys until the light-emitting diode will not start to blink at first slowly, and then quickly.
Using memory keys
Press a key 1, 2 or 3 for activation of the corresponding equipment.
Deleting of all programs of remote control
Press keys 1 and 3 and hold them pressed until the light-emitting diode will not start to blink often, then release keys.
|
< |