And/or tubes it is possible to remove/establish the Zolotnikovy box both at the established transmission, and at the removed.

Removal

If this operation is not executed yet – remove the oil pallet and the mesh oil filter

Fig. 3.73 . Shtekernye of connection of sensors

Carefully disconnect tips of the sensor of pressure for hydrosystem 1 in AKP G1931 and the pressure sensor for hydrosystem 2 in AKP G1942 (fig. 3.73) .

Fig. 3.75 . Tip

Turn off tips (fig. 3.75) .

Fig. 3.76 . Unblocking and detachment of tips

Carefully unblock tips and disconnect (fig. 3.76) .

Fig. 3.77 . Sensor of temperature of oil of a transmission

The sensor of temperature of oil of a transmission of G93 is tightened with the moment of 10 N · m (fig. 3.77) .

Fig. 3.78 . Bolts of fastening of a zolotnikovy box

Turn off bolts of a zolotnikovy box «a cross - on - a cross» (fig. 3.78) .

Inhaling moment: 8 N · m +90 °.

Fig. 3.79 . Sensor of frequency of rotation of a target shaft

The sensor of frequency of rotation of a target shaft of KP G195 is tightened with the moment of 10 N · m (fig. 3.79) .

Installation is carried out in return sequence.

After installation fill in ATF, then check ATF level, if necessary – add oil