Conditions

The fuel tank should be empty.

Safety locks 13 and 14 should be taken from the nests.

Works order

Fig. 2.308 . Place of cutting of a carpet

Cut a carpet to the left of a point And to a point In in in advance made an incision place (fig. 2.308) .

Fig. 2.309 . Nuts of fastening of a cover

Turn off nuts of 1 fastening of a cover (fig. 2.309) .

In case of need turn off fastening of a support of an armrest 2 or a basic arm.

Turn off a lock ring by means of T10202 key from the left flange of the sensor.

Remove a flange on the left side of a fuel tank.

Remove fuel from the case of the fuel filter.

Mark with a color pencil the assembly provision of a cover of the filter 2.

Fig. 2.310 . Nuts of fastening of a cover of the filter

Disconnect a wire of weight 1 and turn off a filter cover (fig. 2.310) from the case.

At replacement of the loose leaf of the filter do not bend conclusions of connection of weight and check, that they were rather tense.