VW Touareg repair


+ 1. Operation and car maintenance
- 2. Engine
   + Preliminary checks on the car
   + Mechanical part (petrol engines 3,2L)
   + Mechanical part (petrol engines 4,2L)
   + Mechanical part (diesel engines 5,0L)
   + Removal and stretcher installation
   + pressurization System (diesel engines)
   + cooling System (petrol engines)
   + cooling System (diesel engines)
   + greasing System (petrol engines)
   - Greasing system (diesel engines)
      Check of level of engine oil
      Hermetic drawing
      Untwisting and fastening of a cover of the oil filter
      Check of pressure of oil and sensor of pressure of oil
      Check of pressure of oil on the forward party of the engine
   + injection System (petrol engines)
   + injection System (diesel engines)
   + System of production of the fulfilled gases
   + System топливоподачи (beninovy engines)
   + Tables
+ 3. Transmission
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes


Volkswagen Touareg / Touareg repair>> Engine>> Greasing system (diesel engines)>> Check of pressure of oil on the forward party of the engine
Procedure for test
Remove casings of a motor compartment.
Remove sound insulation from heads of the block of cylinders.

Fig. 2.269 . Carving stopper


Unscrew a carving stopper of A of the oil channel of a checked number of cylinders (fig. 2.269) .

ATTENTION
The opening of the oil channel has very small height of a profile of a carving. The V.A.G 1342/19 adapter because of possible damage of a carving cannot be twisted too strongly.

Connect a manometer for measurement of pressure of V.A.G 1342 oil with the V.A.G 1342/19 adapter to an opening of the oil channel.
Close a verifying opening for the sensor of pressure of oil on V.A.G 1342 manometer by means of a carving stopper of the engine.
Start the engine.
At 1000 mines –1 and temperature of oil of 80 °C pressure of oil should be not less than 1,4 bar.


<