VW Touareg repair+ 1. Operation and car maintenance - 2. Engine + Preliminary checks on the car + Mechanical part (petrol engines 3,2L) + Mechanical part (petrol engines 4,2L) + Mechanical part (diesel engines 5,0L) + Removal and stretcher installation + pressurization System (diesel engines) + cooling System (petrol engines) + cooling System (diesel engines) + greasing System (petrol engines) + greasing System (diesel engines) + injection System (petrol engines) - Injection system (diesel engines) Check and adjustment of position of pistons pump nozzles Removal and installation of an inlet collector Removal and installation pump nozzle Replacement of sealing rings of round section pump nozzle + System of production of the fulfilled gases + System топливоподачи (beninovy engines) + Tables + 3. Transmission + 4. Running gear + 5. Steering mechanism + 6. Brake system + 7. Onboard electric equipment + 8. Body + electric equipment Schemes Куда Сдать аккумулятор от ибп. |
Volkswagen Touareg / Touareg repair>> Engine>> Injection system (diesel engines)>> Replacement of sealing rings of round section pump nozzle
Removal
Remove the pump nozzle.
Extremely carefully remove sealing rings of round section about the pump nozzle.
Watch that on a place of landing of sealing rings there were no agnails.
Installation
Sliding application of sealing rings of round section without identification color marking.
Watch a proper correlation About-shaped and grooves: the thickness of rings decreases in the direction to a nozzle.
Avoid movement of rollers at installation of sealing rings of round section. Sealing rings of round section should not be overwound in a nest the pump nozzle.
Remove heatinsulating consolidation together with a lock ring.
Carefully clear surfaces of installation of sealing rings of kruly section on the pump nozzle.
Insert the assembly T10056/1 plug against the stop into the pump nozzle
(fig. 2.296)
.
Carefully insert the top, thick sealing ring of round section into the assembly plug and in a nest the pump nozzle.
Remove the assembly plug.
Insert the assembly T10056/2 plug against the stop into the pump nozzle.
Carefully insert an average, a thin sealing ring into the assembly plug and in a nest the pump nozzle.
Remove the assembly plug.
Insert the assembly T10056/3 plug against the stop into the pump nozzle.
Carefully insert the bottom sealing ring into the assembly plug and in a nest the pump nozzle.
Remove the assembly plug.
Establish new heatinsulating consolidation together with a lock ring.
Establish the pump nozzle.
|
< |