VW Touareg repair


+ 1. Operation and car maintenance
- 2. Engine
   + Preliminary checks on the car
   + Mechanical part (petrol engines 3,2L)
   - Mechanical part (petrol engines 4,2L)
      Check of directing plugs of valves
      Replacement of an epiploon of a cranked shaft on the party of a damper of krutilny fluctuations
      Removal and installation of a leading disk
      Removal and flange installation on the party of a leading disk
      Removal, installation and tension of a gear belt of a drive of GRM
      Check of an axial gap of cam-shafts
      Replacement of epiploons of cam-shafts
      Replacement of epiploons of sensors of the Hall
      Removal and installation of cam-shafts and regulators of phases of a gazoraspredeleniye
   + Mechanical part (diesel engines 5,0L)
   + Removal and stretcher installation
   + pressurization System (diesel engines)
   + cooling System (petrol engines)
   + cooling System (diesel engines)
   + greasing System (petrol engines)
   + greasing System (diesel engines)
   + injection System (petrol engines)
   + injection System (diesel engines)
   + System of production of the fulfilled gases
   + System топливоподачи (beninovy engines)
   + Tables
+ 3. Transmission
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes



Volkswagen Touareg / Touareg repair>> Engine>> Mechanical part (petrol engines 4,2L)>> Replacement of epiploons of cam-shafts
Removal
Remove a gear belt and gear wheels of cam-shafts.
Unscrew an internal part of a stripper of an epiploon 3240 on some turns from an external part and fix a bolt with a nakatanny head.
Grease a carving head of a stripper with engine oil, put and, having strongly pressed it, screw as it is possible more deeply in an epiploon.

Fig. 2.120 . Stripper installation


Weaken a bolt with a nakatanny head and to turn an internal part of a stripper against a cam-shaft while the epiploon will not be removed (fig. 2.120) .
Clamp an epiploon stripper on flat edges in a vice. With pincers remove an epiploon.

Installation

Fig. 2.121 . Epiploon press fitting


Put an epiploon by means of an opravka 3241/1 and a bolt 3241/6 and press against the stop (fig. 2.121) .
Establish a gear belt and gear wheels of cam-shafts.


<