VW Touareg repair


+ 1. Operation and car maintenance
+ 2. Engine
+ 3. Transmission
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
- 8. Body
   - External elements of a body
      Removal and cowl installation
      Removal of a gas emphasis
      Production of gas from a gas emphasis
      Removal and isolation installation
      Removal and installation of the lock of a cowl
      Adjustment of the lock of a cowl
      Detachment of a flexible cable
      Removal and installation of a door of a luggage compartment
      Adjustment of a door of a luggage compartment with the hinge
      Adjustment of a loop of the lock
      Removal and installation of a cap of a gas emphasis
      Removal and installation of a cap of a gas emphasis
      Removal and installation of elements of locking and door unlocking
      Removal and installation of the lock of a door of a luggage compartment
      Removal and installation of a loop of the lock with a dovodchik
      Removal and installation of the electric motor of opening of a door of a luggage compartment
      Removal and installation of a back spoiler
      Removal and installation of elements of locking and unlocking of the hatch of a fuel tank
      Door adjustment
      Removal and installation of the case of the cylinder of the lock
      Removal and installation of the handle of a door
      Removal and installation of the lock of a door
      Adjustment of a back door
      Removal and installation of the case of the cylinder of the lock
      The elevating and movable hatch with the glass panel
      Removal of the glass panel of the elevating and movable hatch
      Check of a parallel course of the glass panel
      Adjustment of a sealant of the panel of the hatch
      Removal of the sun-protection screen
      Removal and installation of facing of a front bumper
      Removal and installation of facing of a rear bumper
+ electric equipment Schemes


Volkswagen Touareg / Touareg repair>> Body>> External elements of a body>> Removal and installation of the lock of a cowl

Fig. 8.5 . Elements of unlocking and cowl locking: 1–hook; 2–six-sided nut; 3–flexible cable; 4–lever of unlocking of a cowl; 5–facing of the lower part of a rack and; 6–bolt; 7–basic arm; 8–holder; 9–coupling of a flexible cable; 10-cowl lock


Removal
Remove a front grille.

Fig. 8.6 . Coupling of a flexible cable


Take out coupling of a flexible cable 1 up from the holder (fig. 8.6) .
Disconnect a flexible cable.
Disconnect the tip 2 of the contact switch of a cowl of F266.
Unscrew bolts 1 of a frame of a radiator and a bumper arm.

Fig. 8.7 . Removal of a support of the lock


Remove a lock 3 support together with the cowl lock in the sterlka direction in drawing 8.7 .

NOTE
For the best presentation the lock of a cowl and a support of the lock were removed from a radiator frame.
The support of the lock can be removed with a radiator frame only in the direction down.

Unscrew screws of 1 lock of a cowl 2 of a lock 3 support in a radiator frame.

Fig. 8.8 . Extraction of the lock of a cowl


Take the cowl lock up from an opening in a radiator frame (fig. 8.8) .

Fig. 8.9 . Removal of a cable of a drive of the lock


For removal of a cable of a drive of the lock 3 compress a loop 2 and a cable in the direction of arrows in drawing 8.9 .
The fixing mechanism разблокиреутся, and now you can remove a cable from the lock of a cowl 1.

Installation
Installation is carried out in return sequence.
Inhaling moment: bolts of 19 N · m.

NOTE
At installation of the lock of a cowl it is necessary to tighten at first bolts on a lock support.


<