VW Touareg repair
+ - + + + + - + + + + + + + + + + + + + + + + +
|
|
Volkswagen Touareg / Touareg repair>> Engine>> Removal and stretcher installation>> Replacement of an epiploon of a cranked shaft on the party of a damper of krutilny fluctuations
Works order
Bring a radiator frame into service situation.
Remove a damper of krutilny fluctuations.
NOTE
At dismantle of an epiploon watch that the landing surface was not damaged.
|
Carefully remove an old sealing ring by means of T20143/2 stripper
(fig. 2.174)
.
Remove the oil remains on a shatunny neck of a cranked shaft by means of pure rags.
NOTE
Remove a basic ring from an epiploon directly ahead of installation.
|
Connect the assembly T10196/1 plug and the assembly T10196/2 plug. Dress an epiploon And against the stop on the assembly T10196/2 plug
(fig. 2.175)
.
Separate assembly plugs.
Establish the assembly T10196/2 plug together with an epiploon on sealing laying of a cranked shaft and tighten bolts with a nakatanny head And by hand
(fig. 2.176)
.
Press an epiploon by means of the assembly T1096/3 plug against the stop.
Further installation is carried out in return sequence.
|
<
|