Works order (cars with alphabetic references of the engine AYH, BKW)

Dismantle the fuel filter.

Cars with BLE and BWF engines

Remove a bypass cover with a radiator of system of a retsirkulyatsiya.

Assembly operations for all cars

Dismantle the three-phase generator.

NOTE At dismantle of an epiploon watch that the landing surface was not damaged.

Fig. 2.178 . Removal of a sealing ring

Carefully remove an old sealing ring by means of T20143/1 stripper (fig. 2.178) .

Remove the oil remains from a power shaft of the three-phase generator by means of pure rags.

Fig. 2.179 . Expression of an internal part of an epiploon

Squeeze out an internal part of an epiploon outside how it is shown in drawing 2.179 .

Fig. 2.180 . Epiploon installation

Fasten directing sleeve of T10208/1 by hand to a power shaft of the three-phase generator and carefully establish an epiploon And against the stop (fig. 2.180) .

At first establish T10208/2 emphasis, then press an internal part of an epiploon against the stop.

Fig. 2.181 . Epiploon press fitting

At first establish T10208/3 emphasis, then press an external part of an epiploon against the stop (fig. 2.181) .

Further installation is carried out in return sequence.