Works order

Fig. 2.177 . Removal of a sealing ring

Carefully remove an old sealing ring by means of T20143/2 stripper (fig. 2.177) .

NOTE At dismantle of an epiploon watch that the landing surface was not damaged.

Remove the oil remains on a shatunny neck of a cranked shaft by means of pure rags.

Fig. 2.175 . Assembly plugs

Connect the assembly T10207/1 plug and the assembly T10207/2 plug. Dress an epiploon And against the stop on the assembly T10207/2 plug (fig. 2.175) .

Separate assembly plugs.

Establish the assembly T10207/2 plug together with an epiploon on sealing laying of a cranked shaft and tighten bolts with a nakatanny head And by hand.

Fig. 2.176 . Epiploon press fitting

Press an epiploon by means of the assembly T1207/3 plug against the stop (fig. 2.176) .

Further installation is carried out in return sequence.