Fig. 6.49 . Lever of the pedal parking brake: 1–lever of removal from a brake; 2–draft of removal from a brake; 3–emphasis; 4–foot parking brake; 5–six-sided bolt, 23 N · m; 6–six-sided bolt, 23 N · m; 7–forward cable; 8–six-sided bolt, 2 N · m; 9–contact switch of the parking brake

Fig. 6.50 . Transfer module: 1–transfer module; 2–washer; 3–buffer; 4–holder of a stopper of a cable; 5–Torx screw; 6–cable stopper; 7–kompensatorny bracket; 8–six-sided nut; 9–six-sided bolt, 23 N · m; 10-клипса; 11-forward cable; 12-brake cable, back

Fig. 6.51 . Back brake cable: 1–brake cable, back; 2–sealing ring; 3–sealing ring; 4–movable sleeve; 5–lock ring

Removal

Remove an upholstery on the party of the driver.

Disconnect the tip from the contact switch of the parking brake.

Remove the left block of safety locks and postpone it together with a plait of wires as it is possible further aside

Fig. 6.52 . Spring compression

At first press a plate of a lock spring of A down that then compress a spring of adjustment of a cable of B (fig. 6.52) .

Fig. 6.53 . Drill installation

Fix the compressed spring, having inserted, for example, a drill through openings of the lever of the pedal parking brake and the fastening located behind it for a cable (fig. 6.53) .

Disconnect A cable from fastening of 1 lever of the pedal parking brake.

Fig. 6.54 . Cover of a cable and its fastening

Unblock a cover of a cable 2 of fastening (fig. 6.54) .

Unscrew two fixing bolts of the lever of the pedal parking brake.

Take the lever of the pedal parking brake from fastening.

Installation

Installation is carried out in return sequence

Take shipping protection (drill) from the lever of the pedal parking brake.

There will be an automatic alignment of length of a brake cable by means of springs.

Check a free wheeling of the lever of the pedal parking brake