Removal

Remove two back wheels.

Remove the central console.

Fig. 6.55 . Six-sided nut

Before untwisting of a six-sided nut 1 measure size a (fig. 6.55) .

Write down the received value.

Turn a six-sided nut 1 back while it will be impossible to take brake cables from a compensatory bracket (fig. 6.55) a little .

Unblock a cable cover from fastening.

Detachment of a brake cable from the rasporny lock.

Probably only at the unloaded brake cable.

Unscrew a locking bolt of an adjusting nut of the parking brake.

Fig. 6.56 . Pressing a nipple

Press a nipple of a brake cable against a holding spring in the rasporny lock down while a brake cable it will be impossible to take (fig. 6.56) .

The right side is shown in a specular reflection, i.e. it is necessary to press a nipple of a brake cable up.

Unblock a brake cable from the holder on a tank.

Remove a brake cable from the holder on a stretcher and then take it.

Installation

Installation is carried out in return sequence

The nipple of a brake cable should be fixed in the rasporny lock with click.

Establish brake cables in a kompensatorny bracket.

Twist a six-sided nut 1 on a pusher 2, the size a measured before a body (fig. 6.55) will not be reached yet .

Check a free wheeling of the lever of the pedal parking brake