VW Touareg repair
+
1. Operation and car maintenance
+
2. Engine
-
3. Transmission
+
6-step automatic transmission 09D
+
hydrotransformer Check
-
Mechanical transmission 08D and transfer case Е473
Marking of a transfer case
Marking of forward main transfer
Marking of reverse main gear
General instructions
Electric / electronic components and places of their installation on a transfer case
Removal and installation of governing body of a transfer case of E473
Removal and installation of the control unit of a transfer case of J646
Removal of a transfer case
Installation of a transfer case
Laying of a ventilating tube on a transfer case
Replacement of a rezinometallichesky support of an arm of a transmission
Check of level of oil in a transfer case
Removal and installation of sealing rings of a flange of a shaft of selection of capacity/driveshaft and electric motor of a transfer case
Replacement of a sealing ring of a flange of a shaft of selection of capacity / the back driveshaft (the transfer case is established)
Removal of the electric motor of a transfer case of V253
Installation of the electric motor of a transfer case of V253
Check of level of oil in the main transfer of a forward axis
+
Driveshaft
+
Driving mechanism
+
Tables
+
4. Running gear
+
5. Steering mechanism
+
6. Brake system
+
7. Onboard electric equipment
+
8. Body
+
electric equipment Schemes
Volkswagen Touareg / Touareg repair
>>
Transmission
>>
Mechanical transmission 08D and transfer case Е473
>>
Check of level of oil in a transfer case
Fig. 3.106
. A bolt for control of level of oil
Unscrew a bolt for control of level of oil
(fig. 3.106)
.
Level of oil is sufficient, if it is in limits of the bottom edge of a jellied opening.
Twist and tighten a new bolt.
At the gulf of oil pay attention to the next moments.
Unscrew a bolt.
Fill in transmission oil to the bottom edge of a jellied opening.
Twist and tighten a new bolt.
Inhaling moment: an opening bolt for the gulf of oil of 20 N · m.
<