VW Touareg repair


+ 1. Operation and car maintenance
+ 2. Engine
+ 3. Transmission
- 4. Running gear
   - Wheels and tires
      General information on wheels and tires
      Specifications for re-equipment of disks and tires
      Indexes of speed of tires
      Marking on disks
      Compound disks
      Wear and hodimost of tires
      Wear of high-speed tires
      Service of tires
      Evenly worn-out tires
      Measurement of height of drawing of a protector
      Unilateral wear
      Diagonal non-uniform wear
      Noise of a kacheniye of tires
      Balancing
      Radial and lateral palpation of wheels and tires
      Check of radial and lateral palpation of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435
      Minimization
      Lateral withdrawal of the car
      Elimination of lateral withdrawal
      Damages of tires
      Design of the radial tire
      Loss of pressure of air in tires
      Damages of tires because of mistakes when mounting (assembly damages)
      Marking боковины tires
      Shift of wheels
      Touareg since 2003 modeling years
      Repair of the monitoring system of pressure of air in tires
      Removal and installation of the control unit of the monitoring system of pressure in tires J502
      Repair of system of regulation of a road clearance
      Components of system of regulation of a road clearance and place of their installation
      Removal and compressor installation without the block of electromagnetic valves
      Air pipe repair
   + Forward suspension bracket
   + Back suspension bracket
   + Tables
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes



Volkswagen Touareg / Touareg repair>> Running gear>> Wheels and tires>> Measurement of height of drawing of a protector
NOTE
To make measurements for determination of height of drawing of a protector follows in the main dredging of a protector.
Not to measure on TWI (Tread Wear Indikator means. indicator of wear of a protector).

To measure height of drawing of a protector follows in the main dredging of a protector in the most strongly worn-out places of the tire. Positions of indicators of wear of a protector are visible on a protector shoulder.
Instead of «TWI» the badge can be specified «?» or «a firm logo» producer.
Ledges of the indicator of wear of a protector have height of 1,6 mm. This size is the minimum depth of drawing of the protector, ordered in Germany legislatively.
In other countries other norms can operate.

Fig. 4.5 . Indication of wear of the tire: A–labels of the indicator of wear of a protector in the main flutes of a protector; B–the main flutes of a protector with labels of the indicator of wear of a protector


Labels of indicators of wear of a protector cannot be taken into consideration at measurement. The size in the deepest place of a flute of a protector (fig. 4.5) is solving .


<