VW Touareg repair


+ 1. Operation and car maintenance
+ 2. Engine
+ 3. Transmission
- 4. Running gear
   - Wheels and tires
      General information on wheels and tires
      Specifications for re-equipment of disks and tires
      Indexes of speed of tires
      Marking on disks
      Compound disks
      Wear and hodimost of tires
      Wear of high-speed tires
      Service of tires
      Evenly worn-out tires
      Measurement of height of drawing of a protector
      Unilateral wear
      Diagonal non-uniform wear
      Noise of a kacheniye of tires
      Balancing
      Radial and lateral palpation of wheels and tires
      Check of radial and lateral palpation of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435
      Minimization
      Lateral withdrawal of the car
      Elimination of lateral withdrawal
      Damages of tires
      Design of the radial tire
      Loss of pressure of air in tires
      Damages of tires because of mistakes when mounting (assembly damages)
      Marking боковины tires
      Shift of wheels
      Touareg since 2003 modeling years
      Repair of the monitoring system of pressure of air in tires
      Removal and installation of the control unit of the monitoring system of pressure in tires J502
      Repair of system of regulation of a road clearance
      Components of system of regulation of a road clearance and place of their installation
      Removal and compressor installation without the block of electromagnetic valves
      Air pipe repair
   + Forward suspension bracket
   + Back suspension bracket
   + Tables
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes


Volkswagen Touareg / Touareg repair>> Running gear>> Wheels and tires>> Air pipe repair
It is necessary to replace faulty air pipes entirely. Replacement of a part of an air pipe is possible by means of a shtekerny connector.

NOTE
The place of repair should be in a zone protected from water, for example in a wheel niche behind a podkrylok.
The Shtekerny connector is necessary for attaching by means of a collar to a body or to a cable.

For repair it is necessary to choose direct sites of an air pipe.
By means of a cutting grip of VAS 6228 cut off an air pipe at right angle.

Fig. 4.45 . Places of drawing of labels


Mark the air pipe end on the car and the end of an established piece by means of a waterproof slate pencil (fig. 4.45) .
Labels serve for control after carrying out repair.
After that lay a new air pipe along original points of fastening.
Insert both ends of the pipeline into a shtekerny connector against the stop.
Air pipes are inserted into a connector remains visible) enough if first color label it is not visible (the second label.


<