VW Touareg repair


+ 1. Operation and car maintenance
+ 2. Engine
+ 3. Transmission
- 4. Running gear
   - Wheels and tires
      General information on wheels and tires
      Specifications for re-equipment of disks and tires
      Indexes of speed of tires
      Marking on disks
      Compound disks
      Wear and hodimost of tires
      Wear of high-speed tires
      Service of tires
      Evenly worn-out tires
      Measurement of height of drawing of a protector
      Unilateral wear
      Diagonal non-uniform wear
      Noise of a kacheniye of tires
      Balancing
      Radial and lateral palpation of wheels and tires
      Check of radial and lateral palpation of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435
      Minimization
      Lateral withdrawal of the car
      Elimination of lateral withdrawal
      Damages of tires
      Design of the radial tire
      Loss of pressure of air in tires
      Damages of tires because of mistakes when mounting (assembly damages)
      Marking боковины tires
      Shift of wheels
      Touareg since 2003 modeling years
      Repair of the monitoring system of pressure of air in tires
      Removal and installation of the control unit of the monitoring system of pressure in tires J502
      Repair of system of regulation of a road clearance
      Components of system of regulation of a road clearance and place of their installation
      Removal and compressor installation without the block of electromagnetic valves
      Air pipe repair
   + Forward suspension bracket
   + Back suspension bracket
   + Tables
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes


Volkswagen Touareg / Touareg repair>> Running gear>> Wheels and tires>> Check of radial and lateral palpation of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435
Check of lateral palpation
Previously pull the indicator of hour type for tires approximately on 2 mm.

Fig. 4.15 . Check of lateral palpation


Put the indicator to боковине tires (fig. 4.15) .
Slowly scroll a wheel.
Write down the minimum and maximum deviation of an arrow.

NOTE
If the difference is considered more than 1,3 mm, lateral palpation exceeded.
In this case it is possible to reduce it by means of minimization.
Because of small roughnesses on rubber it is not necessary to consider deviations of an arrow of the indicator.

Check of radial palpation

Fig. 4.16 . Check of radial palpation


Previously pull the indicator of hour type for tires approximately on 2 mm (fig. 4.16) .
Put the indicator to a tire protector.
Slowly scroll a wheel.
Write down the minimum and maximum deviation of an arrow.

NOTE
If the difference is considered more than 1 mm, radial palpation exceeded.
In this case it is possible to reduce it by means of minimization

Check of radial and lateral palpation of a wheel
Establish a wheel on the balancing stand.
Use the tsangovy being self-unclenched adapter for balancing VAS 5271 stands.
Previously pull the indicator of hour type for tires approximately on 2 mm.
Slowly scroll a wheel.
Write down the minimum and maximum deviation of an arrow.

Fig. 4.17 . Scheme of check of radial and lateral palpation


S–Lateral palpation.
H–Radial palpation.
Compare the received value to nominal parameters in table 4.4.

NOTE
Because of small roughnesses on rubber it is not necessary to consider deviations of an arrow of the indicator.

NOTE
If the measured value exceeds nominal, it will not be possible to reach normal smoothness of a course.


<