VW Touareg repair
+ 1. Operation and car maintenance
+ 2. Engine
- 3. Transmission
+ 6-step automatic transmission 09D
- Hydrotransformer check
Liquid pumping from the hydrotransformer
Repair of a drive of gear shifting
Removal and installation of the handle of the selector
Check and adjustment of draft of the selector
Removal and installation of draft of the selector
Removal and slip installation
Removal and frame installation
Removal and installation of an electromagnet of blocking of the N110 selector
Removal and installation of the switch of the selector (the lever is blocked in the situation "P") F319
Removal and installation of a drive of gear shifting
Removal and transmission installation, cars with the diesel R5 engine
Removal and transmission installation, cars with petrol V6 and V8 engines, turbodiesel engines V6 TDI, V10 TDI and the petrol W12 engine
Removal and installation of highways and ATF radiator
Removal and installation of the control unit of an automatic transmission of J217
Replacement of a sealing ring of a secondary shaft
Removal and installation of the oil pallet
Removal and installation of the mesh oil filter
Removal and installation of the sensor of pressure for hydrosystem 1 in AKP G193 and the pressure sensor for hydrosystem 2 in AKP G194
Removal and installation of a zolotnikovy box
Removal, installation and adjustment of the multipurpose F125 switch
+ Mechanical transmission 08D and transfer case Е473
+ Driving mechanism
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes
Volkswagen Touareg / Touareg repair>> Transmission>> Hydrotransformer check>> Removal and slip installation
Remove the selector handle.
It is necessary to observe sequence of shutdown of joint stock bank surely.
Disconnect the mass plug from joint stock bank at the switched-off ignition.
Remove an overlay of the central console.
Disconnect the tip 1.
Carefully disconnect clamps 2 at the left and to the right of a frame (fig. 3.15) .
Installation is carried out in return sequence. Thus it is necessary to consider the following.
Establish an overlay of the central console.
Connect joint stock bank.
Establish the selector handle.