Removal

Remove the oil pallet.

Fig. 3.71 . Bolts of fastening of the mesh filter

Remove bolts (fig. 3.71) .

Remove the mesh oil filter.

Installation

Fig. 3.72 . Laying and fillet of the mesh filter

Establish new laying 1 on soaking-up fillet of the mesh oil filter 2 and grease with its ATF oil (fig. 3.72) .

Hairpins of M6x70 are used as directing for the mesh oil filter.

Twirl 3 hairpins of M6x70 a hand in a zolotnikovy box.

Establish the mesh oil filter on hairpins.

Carefully to press soaking-up fillet against the stop into an opening on a zolotnikovy box.

Tighten bolts of the mesh oil filter.

Establish the oil pallet.

After installation fill in ATF, then check ATF level, if necessary – add oil.

Inhaling moments

Bolts of the mesh oil filter: 10 N · m.